Suzuki LT-R450 Forum :: banner

Wheel Nuts

1789 Views 11 Replies 6 Participants Last post by  crazy canuck
i have some paddle tire to go on my bike,with rims.but the stock nuts do not fit these rims because of the shape.does anyone know the size of the nuts so i can get some to sit flat against the rims.thank you going to oregon on sunday,also is there any good shops around north bend to get parts.
1 - 1 of 12 Posts
Be careful getting them from a hardware store, not many have the exact same size. Most are smaller nut (14mm) and overall surface of the washer is small in comparison to Yamanuts. Also wouldnt hurt to have a dot of Loctite on the studs, I speak from experience on this one. I ovaled out the holes on my paddles last weekend when I lost two lugnuts. And FYI, there is no Suzuki dealer between North Bend and Eugene, so be careful how far north you go.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.