[bodyguard_29]

[attachmentid=1796]Fuel - I tried to send this as a PM, but couldn't figure how to attach the picture.
I don't think this is right. This is the Rath bumper that I won in the raffle and there is more than a quarter inch gap on each side of the upper mount of the bumper where it should be flush with the frame and the holes don't line up. I am thinking that this may be for another quad. What do you suggest?

 

[kidsdad0101]

I had a little bit of troubles with my rath also. Sept mine was unusually tight.

 

[bodyguard_29]

I snapped my bar clamp trying to pull it in, and it didn't really even move the bumper mounts in at all.

 

[fatv]

I would loosen the bottom bolts then see if the top ones will then fit. If that does not work .... BFH .... remove th bumper and use a mallet. Tap the bars up into place........ PM Cernics and i am sure they can get you a new one. I bought the Bumper from Cernics.


FUELATV

 

[Kracker]

Ratchet strap!! Give that try.

 

[SandJunkie]

I didn't know "Frustration in a box" was a prize in the raffle????

 

[onesavage]

Junkie how's the newest Junkie fiber secret stuff coming?

 

[SandJunkie]

Haven't really worked on it to tell you the truth...we had so much stuff going on to get the bike ready for the show...whew...

Give me a call tomorrow afternoon and I'll give ya the 411...on the Junkie Fiber phone...951-275-1303

 

[onesavage]

Haven't really worked on it to tell you the truth...we had so much stuff going on to get the bike ready for the show...whew...

Give me a call tomorrow afternoon and I'll give ya the 411...on the Junkie Fiber phone...951-275-1303
[/b]

no problem. i knew you've been busy with that and thats why i haven't been bugging you...

phone book edited... what is the other number i have?

 

[JAKELTR450]

looks like an AC racing bumper fit to me. i would say put one bolt in on one side and then the other but just enough that it settles in the thread, but does not compress the bumper. then tighten both of them one turn at a time, one then the other till it's fully tightened. hope this works.

 

[SandJunkie]

Thats my cell too but I want to look busy on the Junkie Line...I have 2 cell phones now...so I look like I'm communicationally challenged... :lol:

 

[onesavage]

shall i call both lines tomorrow at the same time? :lol:

ok people if you want to order some Junkie Fiber you have to call about noon on the Junkie line.
remember he'll be at the booth and we need to represent for Junkie :fro:

 

[XxGlamisDunerxX]

Dont wana hijack the topic but lol Junkie you should make a LTR450HQ Junkie fibered peice to raffle off on the site, I think that would be pretty cool, Id want it on my bike!

 

[SandJunkie]

I did that already...I did a Junkie Fiber beak for the JJ raffle...or didn't you notice?...pfft...

 

[XxGlamisDunerxX]

I mean one that has LTR450HQ on it in some weird Junkie style, carbon fiberd out LTR450HQ stuff im at a loss for words...could that be done... like it is at the top of the page.. ltr450 HEADQUARTERS

 

[SandJunkie]

Hmmm....how about a Junkie Fiber clutch cover with a "LTR450HQ.com" sticker laminated into it?..

I could do it in blue Junkie fiber so it will have the overall blue effect?...

Now all we gotta do is find a clutch cover... <_<

Or some radiator shrouds?...with the "LTR450HQ.com" sticker laminated on it?..

 

[onesavage]

i know someone with a clutch cover but it has been turned into a sick Junkified leopard skin pimpin cover :fro:

 

[XxGlamisDunerxX]

Clutch cover would be awesome...

 

[onesavage]

Clutch cover would be awesome...
[/b]

oh it is :lol:

 

[SandJunkie]

Yea that clutch cover really was something else...I would probably pimp it at Halloween weekend in Glamis...