[MX41]

Ok well I'm not sure what exactly happened..I changed my oil, and the drain bolt on the main tank(the one with the dipstick) is dripping oil out of the drain bolt. I noticed it was very odd that when I tried to tighten the bolt, it pretty much wouldnt stop spinning after a certain point. Anyone else have this problem?

 

[LTR MICHAEL]

you cross threaded the bolt and probably stipped the threads. you can try tapping it or maybe even a helicoil

 

[kheft]

Your stripped it out. You can not over tighten the bolts. Their steel bolts in aluminum...It will strip easy. Your going to have to drill the hole bigger then tap it or try a helicoil(can't gaurntee that will work).

 

[asinatra]

the dry sump tank is a little under 200 bucks. did you make sure you installed the metal gasket ?

 

[SandJunkie]

Yeeeooowwwee...that smarts :angry:

 

[MX41]

the dry sump tank is a little under 200 bucks. did you make sure you installed the metal gasket ?
[/b]

Yep..I replace the gaskets every change usually.

Yeeeooowwwee...that smarts :angry:
[/b]

Yep it smarts pretty bad haha.