Suzuki LT-R450 Forum :: LTR450HQ.com banner
1 - 20 of 44 Posts

· Registered
Joined
·
2,630 Posts
Thanks for the information, thread stickied.
 

· Registered
Joined
·
225 Posts
it doesn't look like i'm affected even though i have one of the first ones delivered in oklahoma. my vin#is 662103215
[/b]

not necessarily it says that the affected vins are *62100089 to *62111626, yours falls between those numbers

count the digits you typed out the first 6 could be the check number they refer to in the pdf
 

· Registered
Joined
·
102 Posts
it doesn't look like i'm affected even though i have one of the first ones delivered in oklahoma. my vin#is 662103215
[/b]
My vin also falls in this batch. I cannot open this file, does any body know what this is about?
Please send me a P.M.
 

· Registered
Joined
·
225 Posts
well its number *62100089 to *62111626 and his number is 662103215
so actually i think hes not in the one that have a recall, ill check mine tonigh
[/b]
if you count the number of digits he posted 9 and the recall shows the last 8 so the * is in place of the first 6 :p call the dealership to know for sure though. the * takes place of the check number whatever that is?
 

· Registered
Joined
·
514 Posts
Does anyone have any problems with having play in there front shocks? I can grab the piggyback and wiggle the shock back and forth on both left and right front shocks. It isn't much but it does concern me.
 

· Registered
Joined
·
242 Posts
Does anyone have any problems with having play in there front shocks? I can grab the piggyback and wiggle the shock back and forth on both left and right front shocks. It isn't much but it does concern me. [/b]
Tigthen the bolts where the shock's mount to the frame.
 

· Registered
Joined
·
320 Posts
my vin # has a 3 before the 621 begins and fall in the recall. Does the * mean any number?

I also could not turn the preload ring on the rear shock it turns out that its stripped . hope the dealer will replace it also.
 

· Registered
Joined
·
277 Posts
Theeagle got his recall notice yesterday down here in NZ so thats all good - has to be done by a qualified welder too !
 

· Registered
Joined
·
292 Posts
Theeagle got his recall notice yesterday down here in NZ so thats all good - has to be done by a qualified welder too !
[/b]
PLEASE HELP ME UNDERSTAND: THE AFFECTED FRAMES ARE BETWEEN 62100089 AND 62111626 RIGHT? MY FRAME NUMBER IS 62112467 WHICH IS NOT IN BETWEEN THOSE NUMBERS. DOES THIS MEAN THAT MY FRAME IS NOT ON RECALL?
 

· Premium Member
Joined
·
20,716 Posts
Check the weld...thats the only way to know for sure... :angry:
 

· Registered
Joined
·
277 Posts
Yes - I agree with Sandjunkie - if it isnt welded right round then it needs to be done !
 

· Registered
Joined
·
47,362 Posts
I just picked mine up today and was wondering if anyone new how I could check out the SCAT service menu they mention in the recall letter. the punch mark they said that was near the vin, are they talking about on the frame?
 

· Registered
Joined
·
320 Posts
I just picked mine up today and was wondering if anyone new how I could check out the SCAT service menu they mention in the recall letter. the punch mark they said that was near the vin, are they talking about on the frame?
[/b]

How long was it gone for ?
I dropped mine off Wed!
Was it a weld job? :blink:
 
1 - 20 of 44 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top