Hey guys, I just recently picked up an 06 non-running LT-R. Fuel system was completed rusted and fuel pump was not working. After a lot of cleaning and replacing various parts, the fuel system is good to go. Changed fluids and plug and attempted to start it only to find it had no spark. I’ve checked every sensor available according to the manual specs and they all pass. Currently the peak voltage I’m reading at the coil is 5-6 volts. Far under the required 150v. No engine codes either with a fully charged battery. I’m at a total loss at this point of what to do/replace. Not sure if it’s a harness issue, a sensor issue or the ecm is toast. Any help would be greatly appreciated.