First Dasa Pipe Flaw

1307 Views 11 Replies 7 Participants Last post by fatv, Aug 16, 2006

yoshi470

Discussion Starter · Aug 15, 2006

well guys today i started up my bike and noticed that it was running very loudly so i took a peck back by the exhaust and noticed that the 3 bolts that hold the mid pipe to the silencer and came lose and fell out. Not a major problem but i would thought that maybe they could have put some lock tight on the 3 bolts???? I guess i wasnt expecting them to fall out after only like 7 hours of use with the pipe on there well looks like im off to the hardware store to get some new bolts!!!

nothing major i guess but all you other dasa owners i guess be on the lookout if all the sudden your quad get alot louder!!!

See less See more

Save

1 - 1 of 12 Posts

SandJunkie

· #6 · Aug 16, 2006

I would not call that a flaw? I reccomend EVERYONE that gets a DASA pipe or ANY pipe for that matter to Removes those bolts and add loc-tight. All of the pipes i ship have the pipe broke down in three peices. So you must assemble the pipe yourself. When assembling use loc-tight. Sorry to hear about this. If you need some new bolts let me know. Once installed correctly with loc-tight you will not have this issue.
FUELATV
[/b]

Could not have said it better myself...and I know because I picked up those pipes with him... <_<

Save

1 - 1 of 12 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month