Suzuki LT-R450 Forum :: LTR450HQ.com banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I'm experiencing some issues with my ltr450, I had one occasion where my quad wouldn't go into first but all other gears worked. After riding around and letting it cool everything worked like a dream but then had my push rod snap and my quad wouldn't come out of gear and stayed in first. I shut it off and let it cool and kept trying to shift so I could push it home and struggled as the shifter tightened up slightly and then finally slipped into neutral but won't come out now, clutch and push rod were replaced cluth was adjusted multiple times to see if that was giving me issues but nothing worked. It runs fine but the shifter still seems slightly tight. No lights came up, iv tried rolling the quad and trying to shift, shifting with it off or running nothing changes. I'm curious as to if anyone has any idea or ran into the same issue
 

·
Registered
Joined
·
176 Posts
does your bike have the shift pin locator bracket installed?
 
1 - 2 of 2 Posts
Top