I have a 2008 suzuki ltr 450. When I turn my key on, fl comes on and stays on. I tried putting it in dealer mode and nothing happens. Dug into the bike and found out it has no spark. So far I have put a new tps sensor in it and I checked the spark plug on a chainsaw and it has spark. Something...
1.) Set of middle engine cases. They need new bearings but are solid with no cracks.
2.) Throttle Body off of a running bike. Good used condition.
Contact me for shipping costs and with offers. Handling time 1 business day, and sometimes same day. Will ship per customer request.
Does anybody have any experience with heavier clutch baskets/ flywheel weights... the only thing i have found has bees a hinson steel basket does anybody know a part number for that basket... working on XC/Trail LTR
hey guys. I have an 08 ltr 450 and my quad wont go into gear when its off. once i start it up, it goes into 2nd gear but not first. i was told its the pin right by the shift lever on the shaft but i wanted to make sure. also does anyone have pictures of their black ltr with graphics on it? thank...
I have 2006 or 2007 LTR that I just bought off my friend. I took it riding a few times. The other day I went to ride it again and I put it in first gear. When i released the clutch i hear a loud grinding noise. I haven't tried to drive with it in first gear because I don't want anything else to...
Im ready for some more power but dont want to spend massive amounts. Unsure on what the next best step is , i am currently running the following:
> Full Rossier exhaust
>13 tooth front sprocket
>Uni Air Filter
I have a 2007 Suzuki ltr 450 with stock exhaust and only mod is a cherry bomb....I'm looking to get a little bit more sound out of it....like more of an aggressive idle....will a stage one cam help with that? I want to do this without having to go deep into the engine...is installation of a cam...
I you could only run one aftermarket part on your ATV, what would it be and why?
I ask cause we're building a 2014 Race Bike this year, and we want every possible angle covered, and Dad and myself really value everyone's input and experience off this site.
Hello Im new to this forum,
Bought an 07 Ltr 450 last week, starts first time and runs ok however when I go into 3rd or 4th gear there is a big backfire ands cuts out!
But then it will start up again no problem
What is the problem occurring? Engnition/ecu/censor?
I was Riding and all of the sudden it stalls out, so I go to re start and it just cranks, so my friend came over on his four-wheeler and I asked him if it was leaking gas, (I smelled gas before i asked him) and he said yes, so I look at my fuel pump and it had broken the black plastic part on...
LTR450 Parts, cases, misc, ecu
I have some LTR450 parts left from parting out my machine.
Can send pictures of anything you would like.
Payment by Paypal or money order threw a wal-mart.
Call or Text Message 978-228-9037 for easy contact and pictures.
Inner cases (both...
im trying to decide which power commander im going to buy and im not sure which one i want.. i was hoping you guys could help me out here.. i know the power commander 5 is more customizable but is it better? ill give you a list of what im in process of putting on my quad so itll help out. also...
my ltr is acting all wierd, just rebuilt the engine. new piston new transmission, timing is at 15 teeth valves are at clearance tolerances, i checked all wiring all sensors, took the throttle body out checked it.
It is hard to start, once started iddling is very hard have to hold throttle, and...
So I have finally decided to do a little build up on my 06 LTR. My Plans are Bigger valves, port, cams, and a higher compression piston. I need to know if there is any good shops around, preferably in the east valley. I was going to use Dirt Fiend Racing, but I can't get a hold of them, need any...
I have a 07 ltr with a 12.5 JE piston and stage one intake cam. two brothers slip on and a pciii fuel controller.
I have recently taken my top end back off for the third time now, 2 previous times didnt seem so bad. First time was to install the cam and piston. i cant seem to figure out why i...
I have a 2007 LTR which needs a complete gearbox rebuild, however I have the chance to put a brand new 2009 RMZ engine into it but before I buy I wanted to know if anyone knows will it definitely work and any other thoughts you have on this idea.