Teather & Starter - Suzuki LT-R450 Forum :: LTR450HQ.com
Engine/EFI/Drivetrain Discuss engine, fuel injection, air intake, and drivetrain modifications here

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 50 (permalink) Old 02-26-2007, 10:49 PM Thread Starter
Member
Feedback Score: 0 reviews
 
Join Date: Jun 2006
Posts: 69
View OzLinc's Photo Gallery(0)
So I've been searching ways to connect my Pro Design N/O kill switch and starter.......There must be a easier and cleaner way.
This gets rid of the Blob, clutch switch and brake light switch.

1. Follow all handlebar & black blob wires down to the large grey connector at the front of the quad.

2. GREY - cut it off

3. Join ORANGE, ORANGE/WHITE and BLACK together.

4. Join BLACK/YELLOW to starter switch wire.

5. Join BLACK/WHITE to other starter switch wire.

You can now take off all the unused swiches without taking them apart........can be easily re-connected.

[attachment=4428:TEATHER_STARTER.JPG]

Kill Switch.........

1. Find Tip Over Switch behind alloy panel at front of quad.

2. Slide off mount and seperate RED wire, dont cut it just seperate it from the other 2.

3. Splice the RED wire (don't cut it) and connect one wire from kill switch.

4. Ground other wire to front of frame.

[attachment=4430:TEATHER_STARTER_3.JPG]

Finished.......
Attached Thumbnails
Click image for larger version

Name:	TEATHER_STARTER.JPG
Views:	3556
Size:	85.8 KB
ID:	625   Click image for larger version

Name:	TEATHER_STARTER_3.JPG
Views:	2722
Size:	78.7 KB
ID:	627  

( . Y . ).....boobs
OzLinc is offline  
Sponsored Links
Advertisement
 
post #2 of 50 (permalink) Old 02-27-2007, 08:10 PM
Senior Member
Feedback Score: 0 reviews
 
gixxerider's Avatar
 
Join Date: Oct 2006
Location: florida
Posts: 163
View gixxerider's Photo Gallery(0) Send a message via AIM to gixxerider Send a message via MSN to gixxerider Send a message via Yahoo to gixxerider
Send a message via AIM to gixxerider Send a message via MSN to gixxerider Send a message via Yahoo to gixxerider
thats how i installed my tether works great and a easy clean install too.

06 ltr 450 white


full yosh rs5
cherry bomb
pro flow kit
hyper wheels blue rings
flex bars
presicion stablizer
moose nerfs (changed tp pro armor fat pegs)
moose chassis skids
moose a-arm skids(took off)
moose bumper
pro armor grab bar
odi locking grips
13th front sprocket
k&k graphics
asv levers
handle bar cluster removed
headlight removed
pro taper bar adapters
front fenders cut
walsh a-arms
fox evols shocks
kenda klaws
cv4 blue hoses
gixxerider is offline  
post #3 of 50 (permalink) Old 02-27-2007, 09:59 PM Thread Starter
Member
Feedback Score: 0 reviews
 
Join Date: Jun 2006
Posts: 69
View OzLinc's Photo Gallery(0)
Quote:
thats how i installed my tether works great and a easy clean install too.[/b]
Yeah, I haven't seen this method listed anywhere on the net so I thought I would post it. Also with the starter; if you just cut the wires down at the grey connector you will save a hell of alot of tracing back from the handlebars; the wires go everywhere before they eventually finish at the front at this connector.

Linc

( . Y . ).....boobs
OzLinc is offline  
post #4 of 50 (permalink) Old 03-09-2007, 05:39 PM
Premium Member
Premium Member
Feedback Score: 0 reviews
 
AL Elks's Avatar
 
Join Date: Sep 2005
Location: St. Pauls, NC
Posts: 3,998
View AL Elks's Photo Gallery(0)
Quote:
So I've been searching ways to connect my Pro Design N/O kill switch and starter.......There must be a easier and cleaner way.
This gets rid of the Blob, clutch switch and brake light switch.

1. Follow all handlebar & black blob wires down to the large grey connector at the front of the quad.

2. GREY - cut it off

3. Join ORANGE, ORANGE/WHITE and BLACK together.

4. Join BLACK/YELLOW to starter switch wire.

5. Join BLACK/WHITE to other starter switch wire.

[attachment=4428:TEATHER_STARTER.JPG]

Kill Switch.........

1. Find Tip Over Switch behind alloy panel at front of quad.

2. Slide off mount and seperate RED wire, dont cut it just seperate it from the other 2.

3. Splice the RED wire and connect one wire from kill switch.

4. Ground other wire to front of frame.

[attachment=4430:TEATHER_STARTER_3.JPG]

Finished.......[/b]
Does it kill the quad immediately if you do this?

The reason I ask is because the tip over switch has to be grounded/activated for about 3 seconds before it will kill the quad. Actually the 3 seconds that it takes for the Tip Over switch may be because of the pressure in the lines that is left over after the fuel pump turns off.


..1st Recipient of the Honored LTR450HQ "Cowbell Award"
AL Elks is offline  
post #5 of 50 (permalink) Old 03-09-2007, 05:51 PM Thread Starter
Member
Feedback Score: 0 reviews
 
Join Date: Jun 2006
Posts: 69
View OzLinc's Photo Gallery(0)
Quote:
Does it kill the quad immediately if you do this?

The reason I ask is because the tip over switch has to be grounded/activated for about 3 seconds before it will kill the quad. Actually the 3 seconds that it takes for the Tip Over switch may be because of the pressure in the lines that is left over after the fuel pump turns off.[/b]
It's instant; it actually by-passes the TOS but kills the quad like the TOS does.

( . Y . ).....boobs
OzLinc is offline  
post #6 of 50 (permalink) Old 03-09-2007, 05:54 PM
Premium Member
Premium Member
Feedback Score: 0 reviews
 
AL Elks's Avatar
 
Join Date: Sep 2005
Location: St. Pauls, NC
Posts: 3,998
View AL Elks's Photo Gallery(0)
SWEET!


..1st Recipient of the Honored LTR450HQ "Cowbell Award"
AL Elks is offline  
post #7 of 50 (permalink) Old 09-15-2007, 12:38 PM
Feedback Score: 0 reviews
 
Join Date: Aug 2007
Posts: 45
View chad20's Photo Gallery(0)
I no this is old but i just wanted to say thanks for the kill switch install that made it very easy.
chad20 is offline  
post #8 of 50 (permalink) Old 12-10-2007, 11:02 AM
Senior Member
Feedback Score: 0 reviews
 
rugger's Avatar
 
Join Date: Aug 2006
Location: Upland
Posts: 124
View rugger's Photo Gallery(0) Send a message via MSN to rugger
Send a message via MSN to rugger
Why do you have to join the black to the orange, orange/white? Isn't that for the brake lite. Is the black white the on off for the lights and the start button. im running lights hid so i need to hook up the grey and the white black also.

So it is the black/white and the black yellow to the rm start button. The black white also to the lights and the grey to the lights. im running a pro armor so ground one to the frame and the other to the red TOS (splice into it.) Tie the orange/ orange white together???? with the black or not.

thanks for the help

2006 LT-R 450 Wifes
DG Streamline Bare Performance BIG GUN
2006 LT-R 450
BIG GUN Exhaust Pro Armor Revolution Nerf Bars with Nets Pro Armor Kill Switch Pro Armor Dominator Bumper Pro Armor Grab Bar Pro Armor Shift Lever Pro Armor Brake Lever ModQuad Brake Block Off FASST FLEX Bars Extreme Haulers 6 cup HIPER Rear wheels Biltanium Hydraulic Clutch ASV C5 Brake and Clutch lever Streamline brake lines and clamps Full set Streamline Rotors and Brakes NoToil Gas Cap Sidewinder 39T Ti-Molly 13T and O ring chain Quad Tech Seat cover Trail Tech HID MR16 Precision (Thanks Fuel) Fuel Stem (Thanks Fuel) Fuel Intake (Thanks Fuel) Power Commander (Thanks Fuel) Dominator Axle Walsh Flows Fox EVOL DSC Quad Tech SP1 Fox Podium Rear TAG Railer
rugger is offline  
post #9 of 50 (permalink) Old 01-31-2008, 12:46 AM
Senior Member
Feedback Score: 1 reviews
 
Join Date: Jun 2006
Location: The Rez
Posts: 6,589
View onesavage's Photo Gallery(0) Send a message via Yahoo to onesavage
Send a message via Yahoo to onesavage
Quote:
Why do you have to join the black to the orange, orange/white? Isn't that for the brake lite. Is the black white the on off for the lights and the start button. im running lights hid so i need to hook up the grey and the white black also.

So it is the black/white and the black yellow to the rm start button. The black white also to the lights and the grey to the lights. im running a pro armor so ground one to the frame and the other to the red TOS (splice into it.) Tie the orange/ orange white together???? with the black or not.

thanks for the help[/b]
Did ya ever figure this out? try this link if you haven't


http://www.lt-r450central.com/invision/ind...?showtopic=1228

Some people are like slinkies. Not really good for anything but they
bring a smile to your face when pushed down the stairs.

onesavage is offline  
post #10 of 50 (permalink) Old 02-09-2008, 11:35 AM
Member
Feedback Score: 0 reviews
 
Join Date: Nov 2007
Location: Glyndon MN
Posts: 77
View quad_racer_17's Photo Gallery(0)
THANK YOU!!!!!!! this has helped a bunch i am only 15 and when i got into the wiring i was lost so thanks a bunch

06 ltr 450

-yoshi cherry bomb
-razr mx tires
-ims roll gp nerfs(black)
-ims roll gp heal gaurds(black)
-rossier full system
-+2 houser stem (black
-houser 1 1/8 bar clamps
-pro taper atv low bend contour bars (black)
-pro taper grips
-lsr block off plate
-n style black gripper seat cover
-cr style kill button
-blingstar iron cross
quad_racer_17 is offline  
Reply

  Lower Navigation
Go Back   Suzuki LT-R450 Forum :: LTR450HQ.com > LTR450 Tech Discussion > Engine/EFI/Drivetrain

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki LT-R450 Forum :: LTR450HQ.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
How To Install Alba Teather Beezer Recalls, how-to's, tips, etc 6 04-11-2009 08:59 PM
Teather Switch Problems ? ( Help ) doublin D General Discussion 8 11-12-2007 04:27 PM
Starter Button And Teather ltracer91r Body/Controls/Protection 8 09-12-2007 05:34 PM
Pro Design Teather Help.. 07LtRipper Body/Controls/Protection 2 02-01-2007 11:30 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome