Fi lights solid red???

kalgard · #1 (**permalink**) 02-09-2010, 04:14 PM

what does that mean??

kalgard · #2 (**permalink**) 02-09-2010, 04:35 PM

sorry left the tps unplugged still runs the same

NWI_#73 · #3 (**permalink**) 02-09-2010, 05:00 PM

Light is on, solid still?

kalgard · #4 (**permalink**) 02-09-2010, 05:06 PM

no it went away but it only idle for about 45sec then dies, with a battery charger its fine

bigbillg · #5 (**permalink**) 02-10-2010, 05:09 AM

With all the trouble you are having it kind of sounds like you have 2 wires that are bearly touching then when you add the charger it's putting enough juice through to make it run i would try to find another wire harness and try that just my 2 cents

kalgard · #6 (**permalink**) 02-10-2010, 08:25 AM

thats what i thought i ran a meter and checked every wire from brain to sensor, i tested and replaced ever sensor, new coil, new battery, new harness, new tps, new fpr, used injector, used pump, 14.12 running vols--i cant rev up past 2000 it stumbles and dies, tps volt are .60,.....Im trying a new spark plug and another stator today

CQR · #7 (**permalink**) 02-10-2010, 08:45 AM

tps voltage at .06 all the time? or just at Idle?

kalgard · #8 (**permalink**) 02-10-2010, 09:13 AM

. with ignition on 0% throttle

CQR · #9 (**permalink**) 02-10-2010, 09:16 AM

What is your running voltage?